Workshop Testimonials
Clifford K.
Stearns, KY
A25-13×40
Workshop
“I purchased the building to build a workshop, my spouse liked the building also and wanted space for her a playhouse. Now we both have our playhouses and the grandkids also love it.”
Dexter B.
Live Oak, FL
A25-13×30
Workshop
“We purchased the building before we moved to our new (old) home. We needed storage and work space to restore our old house. It was originally a parsonage for the Methodist Church here in Live Oak, FL. We hired a local man and our brother-in-law and put it up before starting work on the house. I put all the tools etc. I brought up in an old school bus into the building so we could get to work. Now it’s so full I can hardly move in there. Goes to show, no matter how big your shop, you’ll fill it up.”
Fred P.
Enoch, UT
A30-14×30
Workshop
“I assembled this 30 x 30 basically by myself. My two sons helped with the first two arches, but had to return to San Diego, which left me by myself. I could not put arches together on the ground and raise them as outlined, but rather I installed one piece at a time. Working by myself up and down scaffolding and on ladders. This took me about two weeks, but it sure is worth all the effort it took. I know that I have referred 2 customers who have bought and will continue to refer as interest is shown.
Thanks for a great building at a reasonable price.”
Cindy L.
Boise, ID
A20-12×26
Workshop
“I am a student in an Aramaic language class and we were studying the phrase “seek ye first the kingdom of heaven and all things shall be added unto you”. The Middle Eastern language picture has the seeker line their “vision” up with the starting place of the cosmos. So I did that. In my vision, before the earth was formed, before there were stars, before light separated from the darkness, there was a 20×26 SteelMasterUSA model A for the low, low price. After my meditation of my vision I went into the house, logged onto your website and there on the specials page was a 20×26 SteelMasterUSA model A for my price. So I called, and had you add it onto me visa!”
Preston and Tina L.
Poplarville, MS
A30-14×40
Workshop
“I have a Balloon Decorating and Wedding Equipment Rental business, and desperately needed a place to store equipment, inflate balloons, and build balloon sculptures other than my living room which became balloon world when I had a decorating job to do. Since I have my building now I love to work in it, have plenty of room to inflate my balloons and build the sculptures that I need to do before arriving at a job. It has been so wonderful to have my building and I recommend that anyone that needs to have a shop, storage area, or to put their vehicle in. It was so easy to set up my wife and I did it in two weeks in our spare time. I love my shop, it’s so roomy.”
Ronald P.
Denver, NC
A20×40
Workshop
“Very soundproof, we live near some apartments, and have never had a complaint regarding machinery noise, can heat and cool very economically, neighbors are amazed at the room inside as compared to the visual size outside, because of the self-supporting frames, post are not needed within the working area making the workspace more flexible.”
Stephen M.
San Antonio, TX
A16-11×24
Workshop
“My wife and I, with some help from my Dad, formed up the walls for the concrete slab, moved in 20 yards of base, and tied a ton of steel rebar.
Then we had a concrete company pour and finish the slab. At that point, my Dad, a friend and myself put up the SteelMaster building in three long days.”
David S.
Goldsboro, NC
S41-16×20 Special
Workshop
“Following the sweat equity of almost single-handed installation, I am delighted with the esthetic beauty and the overwhelming functionality of our building! I’m very happy with my very functional single-handedly self-built building. Extremely weather-safe, easily heated and cooled. Looks very nice with custom front, access doors and 16′ powered roll-up door. Others would have to see it to believe it.”
Timothy B.
Sebring, FL
A20-12×26
Workshop
“As owner/builder, I built a steel framed home with detached garage on 12 acres. I wanted a strong small barn for a shop and agricultural equipment storage. Later, attached greenhouse/plant nursery to side of building. Found SteelMaster online very pleased with results.”
Howard E.
Myersville, MD
A25-13×44
Workshop
“After Hurricane Isabel destroyed my other buildings the SteelMaster Building was erected in a minimum of time. After the concrete slab was laid my three sons and two son-in-laws and I put up the main shell in 21/2 days and completed the ends of the building in 2 more days. Part of the building is used as a garage and the other half is use as a wood workshop that is heated and air-conditioned. I love my SteelMaster Building. Thanks SteelMaster.”
Ricky M.
Waxhaw, NC
A30-14×40
Workshop
“This building has been great for me. It was easy to assemble and is a very strong structure. It has been a pleasure doing business with you.”
Jerry G.
Shelby, NC
S30-15×40
Workshop
“I made a two story building; I raised the walls 42″ and have 8′4″ top and bottom. The first floor is my workshop the second floor is our office lounge and work area for my wife. I would be glad to show anyone my building. Everyone who sees it now wants to know who lives there.”
Michael S.
Springfield, TN
X35-15×58
Workshop
“I fly radio controlled airplanes and build model trains and will use great portion of building for these two hobbies, plus workshop.”
Willie R.
Dorchester, SC
A16-11×28
Workshop
“I needed a place to work on my Race Car. I also need a place to set up a Slotcar track. I also need a place to put all my “Junk” as the wife says (Actually my toys). I actually built it my self. The wife and the 2 girls tried to help me but our first try is a disaster. I purchased the bldg (I think its 30 feet wide by 46 feet long and it’s the tallest height you guys carry. I think it took me almost a year just assembling the steel structure. I also built a loft in it. It is continuously always an addition I put in the building. I am planning to put a lean to porch this year. I have a finished picture I would like to send you guys. I love my “MAN CAVE.”
Raymond J.
Clayton, NC
A20-16×30
Workshop
“I have enjoyed my workshop immensely! It not only gives me a place to work but also has become ‘Earl’s World’!!!!!!!!!!!!!!”
Donald G.
Pollocksville, NC
S40-18×60
Workshop
“This is a welding shop with an upstairs insulated room and downstairs tool room both 14×40.The open shop area is 40×56 with a 14×14 overhead door. After the concrete was poured my wife, two boys, and myself had all the steel erected in less than 2 weeks. Keep in mind I work 2nd shift, 3:00 till 11:00 which slowed us down a lot. We did this without aid of any heavy equipment. The building went up with ease and all the holes matched and no leaks. We framed the front in and wrapped it with siding to match the house.”
Michael & Annette D.
Walkersville, MD
A16-11×10
Workshop
Leave a Reply