Comments on: Roofing System Specs

By: Beny Sukandar

Beny Sukandar — Fri, 25 Feb 2011 10:42:04 +0000

Dear Sir;
My company (a poultry company) want to build our chicken breeder and broiler houses with dimension of Lxwxh = 120 m x 14.4 m x 2m per houses. the type of roof is arch roof that able to hold load of 150 Kg/m2. Question: can we buy the machine for production of roof, how much, what is the dimension, is it portable for site production? what is the required thickness of galvanized sheet? what is the specification of coil roll sheet? can we also buy the coil roll sheet from you?
Thanks,
Beny

By: Elizabeth

Elizabeth — Mon, 17 Jan 2011 13:26:44 +0000

Thank you for your post! A steel roofing specialist will be in contact with you right away to discuss your roofing project.

By: james siow

james siow — Sun, 16 Jan 2011 18:13:29 +0000

Require quote for a hurricane proof roof on top of a hotel about 10 storeys high.

Size is 60feet wide by 165ft long.
Height of roof 8feet at sides and 15ft at center.
Need natural lighting at 10ft intervals and insulation.
Close both ends with louvres for air circulation.
Floor not required.
Stormwater drain required all round size is one feet wide by 6inches sides.
The edge of the roof next to the floor can sit flush with this drain such that the bulk of the width of the drain is on the inside of the roof for easier maintenance rather than the outside in the usual installation.
We have a structural parapet wall of one feet high all round so that the roof can sit on the inside edge of this parapet wall.
The roof can also be fixed onto this parapet wall with ease without the need for any drilling onto the concrete floor so there is no chance of water leakage.

The roof must have decent and simple architectural appeal and blend with the external facade.

Please reply ASAP as job is ready to go.

Thanks,

Dr.James Siow
President
USA GREENLEED LLC

By: david

david — Mon, 08 Nov 2010 19:07:14 +0000

please quote 26w x 32L low rise roof . it will be erected on steel columns and frame by me. much like a carport. david in n.h.

By: Elizabeth

Elizabeth — Tue, 17 Aug 2010 17:28:07 +0000

Thank you for your post, Loren! There are several options for insulating your building. A steel building specialist will be in contact soon.

By: Loren Otrambo

Loren Otrambo — Tue, 17 Aug 2010 15:56:49 +0000

Hi,
I have a Steelmaster building and wondering if you have anything that will hold up insulation to the roof ?

Loren Otrambo

By: Elizabeth

Elizabeth — Mon, 02 Aug 2010 12:36:32 +0000

Jason – A steel design specialist will be in contact with you to discuss your roofing system. Thank you for your post!

By: jason Voyce

jason Voyce — Mon, 02 Aug 2010 02:02:00 +0000

I am considering a roof for a boat house that would be similar to your carports except I want a A shape rather than the continous curve. I would like to know specifics like height from eaves to peak and the angle of the ridge panels to flat panels to make some determinations.

thanks, jason.

By: Spike

Spike — Tue, 01 Jun 2010 14:48:00 +0000

We will have a steel building specialist contact you soon with pricing on our roofing systems. Have a great day!

By: Carlton Williams

Carlton Williams — Sun, 30 May 2010 04:13:51 +0000

Need a quote on a roof system to cover a 32 x 32 area.