SteelMaster Difference
SteelMaster
- Galvalume Plus Coating with Energy Star Rating
- Standard Coating – Metric: AZM180 Imperial: AZ60
- Standard Grade 80 Steel (Yield: 80,000 ksi Tensile Strength: 82,000 ksi – Other Grades Available)
- Minimal (at least the specified gauge or stronger)
- Standard Grade 8.2, 1500 Hour Salt Spray Tested Bolts (Optional Stainless, Grade 5 or Grade 2 with 500 Hour Salt Spray Test)
- Hex, Serrated, Self-Locking Nuts (Available in Varying Lengths)
- Pre-Recessed Polyethylene Sealing Washers
- 30-Year Mill-Backed Warranty by ArcelorMittal (NYSE MT)
- Lifetime Warranty on Engineering*
- Engineered State Stamped Blueprints for All 50 States
- Non-Welded 14-Gauge Baseplate (Welded Baseplate Available Upon Request)
- Available in 10′ to 150′ Widths
- Factory Pre-Cut End Walls Panels
- Factory-Cut Overhead Door Openings on Endwalls
- Wind and Snow Rated with or without Factory Endwalls
- A+ BBB Rating
- Same Owner (Rhae Adams) and Location for over 28 Years
- No Broker Mark-Up
- Factory Direct
- Commercial Division
- Multi-Language International Divisions
*Certain exclusions may apply. See full warranty for details.
Industry
- Galvalume Coating with Energy Star Rating
- Standard Coating – Metric: AZM150 Imperial: AZ50
- Standard Grade 50 Steel (Yield: 50,000 ksi Tensile Strength: 65,000 ksi)
- Nominal (average of specified steel gauge)
- Grade 2 Bolts Standard (Grade 8 Available)
- Square Nuts (Non-Locking)
- Nut and Bolt Systems are Different Sizes Requiring Mulitple Tools
- Neoprene Washers
- 20-35 Year Broker-Backed Warranty
- Drawings Available
- Welded Baseplate
- Available in 14′ to 90′ Widths
- Customer/Field Cut End Wall Panels
- Customer/Field Cut Overhead Door Openings on Endwalls
- Wind and Snow Rated without Factory Endwalls
- BBB Ratings as low as D
