SteelMaster Buildings

Government Building Specs

• SteelMaster Structure sizes range from 10 feet to 70 feet in width; however we can accommodate up to 150 feet in width.
• The lengths of our Steel Buildings are customizable in 2 feet increments to your desired length.
• Every SteelMaster Steel Buildings purchase includes 3 sets of engineered state stamped blueprints and newly revised 2009 construction manual.
• Your SteelMaster structure is designed and engineered to meet the loads and codes required for permitting.
• Your SteelMaster structure is manufactured to the most strenuous tolerances in the industry of the highest quality Galvalume Plus steel materials.
• Quality Assurance:  Design components, develop shop drawings, and perform shop work under direct supervision of a Professional Engineer experienced in design of this work. 
• Florida Product Approval # FL5957 and CAN/CSA A660-04 . 
• Design Criteria:  This cold-formed steel building shall be designed based on the “International Building Code,” published by the International Code Council, the “North American Specification for the Design of Cold-formed Steel Structural Members,” published by the American Iron and Steel Institute (AISI), and the “Minimum Design Loads for Buildings and Other Structures,” published by the American Society of Civil Engineers (ASCE 7).
• All design and calculations will be stamped by a licensed Professional Engineer is the applicable state.
• The structures are designed to meet code requirements in effect at time of purchase.  Unless otherwise requested, it will maintain a clear span with no intermediate vertical support and no intrusion on the floor area.
• The structure shall comply with the current version of AISC, AISI, NEMA, and ASTM specifications at the time of manufacturing.
• SteelMaster Buildings, LLC provides a written, mill-backed 30 year non-prorated warranty for rust perforation due to oxidation of the metal arch building.
• All standard metal components of the structure including, but not limited to, the arch panels, end wall panels, sliding doors, service doors, door frames, headers, wind and snow bracing, specialty foundation base connectors, and other framing materials are fabricated from Heave Commercial AZM180/AZ60 minimum triple spot Galvalume Plus steel, in accordance with ASTM A792 and A79M.
• Test results qualified Galvalume Plus coated steel as an approved roof product by the ENERGY STAR Program, both for low-slope and high-slope applications.